Organic Hose
Organic Hose Capabilities
We utilize a range of Organic rubbers for our range of hoses based on your specification and requirements.
Some of our most commonly utilized material types are:
- EPDM – Available Reinforced or Un-Reinforced (Subject to Operating Pressure) with reinforced fiber alignment to give optimum hoop strength and burst resistance. EPDM has a wide temperature range from -40°C to +125°C (-40°F to +257°F)
- PVC Nitrile – Best utilized for applications where excellent resistance towards oil, fuel, and acid is required and where temperature resistance is less of a priority. Featuring a wide temperature range from -40°C to +100°C (-40°F to +212°F)
- Neoprene - For use in dirty air and oil applications, Neoprene has excellent chemical stability and maintains flexibility over a wide range of temperatures -40°C to +110°C (-40°F to +230°F). James Dawsons neoprene products are supplied in either 70° or 80° Shore A hardness
- Neotex - For use in dirty air and oil applications, Neotex has good chemical stability and maintains flexibility over a wide range of temperatures from 40°C to +120°C (-40°F to +248°F). Our Neotex products are supplied in 80° Shore A hardness
Industries and Applications
- select_check_box Off-Road Construction & Mining Vehicles
- select_check_box Off-Road Custom Vehicles
- select_check_box Heavy-Duty Trucks
- select_check_box Power Generation
One-Piece Hoses
James Dawson's one-piece hoses allow for the replacement of formed metal pipework, short rubber cuffs, and clips with a single one-piece hose.
The efficient one-piece hose design not only reduces the costs of parts, it also reduces the time and labor costs of assembly, as well as offering an additional noise reduction benefit.
Legged Hoses
Our Legged hoses are produced as a one-piece hose from vulcanized rubber, hand manufactured by our experienced staff. The result is a single, homogeneous unit.
Hoses with Inserts
James Dawson's organic hoses can be produced with inserts ranging from drainage nuts, radiator caps, and brass adaptors for sensor units to fluid and air flow indicators.
Ad Blue Hoses
Our engineered Ad Blue hoses utilise Peroxide cured EPDM to transfer Ad Blue in and out of the tank.
Large Bore & Complex Shaped Hoses
Our large bore hoses are available with an inside diameter of up to 356mm (14″) and are typically used to reduce weight and cost in air cleaner adapter applications.
NeoTex
NeoTex is a versatile fiber Reinforced Neoprene allowing for higher pressure and vacuum resistance without need for metal reinforcement. Suitable for clean and dirty air, plus oil applications, its cellulose fibre-reinforced construction provides up to eight bar positive pressure 50mm diameter.